Rheem HP-50 Heat Pump Water Heater Installers.

in Heat Pump Heaters

The 1st HP-50 Heat Pump installation in America. The untold story-told.

For this installation in this article (below) we installed the HP50 in Westport Connecticut in January of 2010.
Our clients had us remove an 50 gallon electric water heater, and install the Rheem HP50.

What’s the performance of the the heat pump water heater in colder environments like the North East?
Even tho the ideal conditions (warm air) is not what Connecticut has to offer during the winter, the HP50 still reduced our clients water heater bill by $100 dollars on the very 1st electric bill after the HP50 Hybrid Heat Pump Water Heater was installed.   $100 dollars a month, and the savings will be much greater as the ambient air temperature increases in the spring, summer, and even the fall months.

Connecticut residents give us a call to repair or replace you next Heat Pump water heater. We specialize in the repair and installations of the Rheem HP-50, and the GE Geo Spring heat pump water heater for all of New Haven & Fairfield Connecticut.

A Plus Plumber llc

If you need a great plumber in Connecticut, or a free estimate to fix or replace your current water heater.
Give us a call today.

Main office  – 24 hour emergency water heater repair or replacement services.

(800) 524-4280

E-mail    mr.waterheaters@yahoo.com

Ok, so we didn’t install the first HP-50 in America, but we did install the first HP-50 heat pump water heater in Connecticut and quite possibly all of New England. WaterHeatingInfo.com & Bruce Somers Plumbing, together, installed the first HP-50 heat pump in Connecticut on Saturday, Jan/23/2010. This blog will post in detail the installation process with pictures.

HP-50

HP-50

Other than prices and brief descriptions about HP-50’s, there is not much “real” information about them and nothing like this on the web today. Waterheatinginfo.com is owned, run, and written by real plumbers. So, here is the inside scoop to the newest, most talked about, water heater on the market today . The Rheem HP-50 heat pump water heater.
Two days earlier, we went to pick up the HP-50 from Bender plumbing supply in New Haven, CT. Now, normally picking up a water heater wouldn’t be something worth talking about, but the HP-50 was different. The HP-50 is the first water heater of its kind. The HP-50 is also one of the most efficient water heaters in the world today, by being the first water heater with an integrated heat pump fixed to it. (I wrote a story about the HP-50 about 3 months ago when I first found out about this new, super efficient, electric water heater. To find out how it works read this story.
We went to pick up the HP-50 two days prior to installations, at Bender plumber supply, just to make sure everything was fine. Since this would be the first HP-50 installation in Connecticut, we especially wanted to make sure everything went smoothly.

HP-50 pics

HP-50 pics

In the first picture, you can see Justin in the fork lift bringing the HP-50 to the truck. You can also see Scott Shore, who is one of our main contacts at Bender, out of his office and next to Bruce’s truck so he could see the first HP-50 being sold. We got a bunch of congrats from the sales and counter guys, as well as being the first company to install one. You can see Jay standing next to the HP-50 in the middle picture. New in the box, the HP-50 is very tall at around 80 inch/6.5 feet tall. Bruce Somers, in the 3rd picture, was making room in his truck so we could pick it up. However, this heater was to tall to fit in his truck and since the HP-50 has sensitive refrigeration mechanisms built into, we did not feel comfortable lying it on its back, as would be fine with traditional water heaters, until we spoke to Rheem factory representatives. This was not a problem as our supplier, Bender plumbing in New Haven, CT, provides free delivery, as many suppliers do for their regular contractor customers, which we are. We set the delivery time on the schedule and had the HP-50 brought back in the supply house.
Saturday comes along and the man from Benders delivers the HP-50 right on time, nine o’clock in the morning, on the dot. So then we’re set to install the first Rheem HP-50 in Connecticut for our new client, Mike from Fairfield County, CT.

HP-50 in box

HP-50 in box

Installing the HP-50 is pretty straight forward and very similar to installing a traditional electric water heater, but with a few differences.
1. It’s tall, at 75 inches high, plus needs another 12 inches of makeup air space above it. Basically, you’ll need at least a 7.5-8 feet of total height, from the basement floor to the ceiling, to meet the proper installation requirements. The location of the old electric water heater, during our installation, didn’t have enough height for the new HP-50. The result, was that we had to install the HP-50 on the other side of the client’s basement.

2. It condensates.  The heat pump produces some condensation water that needs to go somewhere.  That must be taken into consideration before the installation process.

HP-50 condensation lines

HP-50 condensation lines

For our installation, we had to move the old water heater location to the other side of the basement, for two important installation reasons. The first, to get the height we needed, and second, for condensation. On deliberation, we put it right next to a sump pump that was in the basement, which was the best place in our case.
You will need to consider the condensation water for the HP-50 before the installation. Most basements will have something usable nearby; a sump pump, floor drain, slop sink, laundry waste line, or if there’s nothing nearby (close enough were gravity can take the water where it needs to go), you can get a condensation pump to pump the water “up & over” to the nearest drain.

Condensationconsitera

HP-50 water lines

HP-50 water lines

Another thing that makes the HP-50 different than other water heaters, is the cold water feed and hot water supply lines that are on the side of the tank, like an indirect water heater. The reason is, the heat pump fan is on top of the HP-50 where the water lines would normally be, the result of this = the lines are on the side. The other reason is the HP-50 is very tall. Its actually a good thing the water heater feeds cold and hot water lines on the side of the tank, due to the fact that a ladder isn’t necessary for the installation process.
If your lucky, you won’t have to do any modifications with your HP-50 installation. Although, if a few are necessary, as there was with our installation, any extra fees like we encountered (electrician to run the eclectic line to the new installation location), the return on investment makes everything still worth it. The HP-50 is so efficient, that in the right conditions, it uses less than half the energy as that of normal electric water heaters.  With the 30%  Federal tax credit this heater is very affordable. It’s almost crazy not to make the investment for this water heater if you live in a state with high electric rates such as CT, CA, NJ, NY, . It comes with a ten year warranty, which is longer than the industry standard 6 year warranty.

HP-50 temp pad

HP-50 temp pad

In energy saver mode, the heat pump does all the work, at this time the water heaters heat pump does make some noise, but it’s not to loud. I’d say the HP-50, when operating on energy saver mode, is about as loud as a large freezer, something a bit louder than the refrigerator in your home. The sound is a hum, just like a commercial grade freezer would make.
***Note: The HP-50 will not start heating water in the energy saver mode for 45 minutes after a new installation. We found that out the hard way as we stood around the heater wondering what was wrong, because we couldn’t hear the fan on the heat pump kick on. We knew that we installed it correctly, so we waited and tried to call the factory reps, but 45 minutes after the installation, the HP-50 just kicks on by itself. We weren’t sure what to make of it at the time, but the next day an HP-50 rep told us that a 45 minute delay is normal. Surprisingly, we didn’t see this information in the installation manual, possibly because it’s so new that it was left out by mistake.

Prices for the HP-50 varies greatly in different areas of the county. The rock bottom price for the HP-50 is around $1,500. This is the rock bottom, lowest level, discount pricing from a large plumbing supply store with the top level contractor discounts. If you’re just a normal home owner walking in a plumbing store, don’t be surprised to see prices as high as $2,550. These water heaters are extremely rare; plumbing stores don’t even have them in stock. WaterHeaterInfo.com /A Plus Plumbing is one of a few companies getting these heaters at reasonable prices.

HP-50  Top cover off

HP-50 Top cover off

Buyer’s warning and advice for Heat Pump water heaters.

DO NOT BUY a HP-50 online from some shady discount plumbing website.  Most of them are nothing more than useless middle men with fancy websites and fake testimonies!   Those kinds of sites are fine for buying T-shirts, books, and other small ticket ideas, but HP-50’s are very expensive, and sensitive because the entire thing is filled with brand spanking new technology.  So don’t take the chance with a company you don’t know or looks too good to be true.  I don’t think you should take the chance on buying one of these expensive HP-50 water heaters that could have been mishandled.  Saving a couple hundred bucks is a great idea,  but if it gets damaged in any way you are going to be out a hole lot of money, because these heaters are not easily replaceable!  And online companies are are horrible at covering warranties!   Also if the heat pump water heater is damaged you will not know it’s not working until after you have it installed.  (So most likely you will not have hot water for many days until you can get a new one)  Also Heat Pump water heaters are very hard to transport.  The box is about 6 feet 4 inches tall at least, and you can NOT lay heat pump water heaters down in the back of a truck!  They must stay up right because they have sensitive parts inside the heat pump.  Buying them from quality plumbing supply companies in your area should offer you free delivery, delivery at next to no charge.

Hopefully this was helpful. If you have any questions about the HP-50 just ask away, we’re always glad to answer any of your questions. If you would like more information about the new Rheem HP-50 electric heat pump hot water heater from Rheem’s official HP-50 website, just click this link.

On behalf of the entire WaterHeatingInfo.com team, thanks for reading.
If you’re interested in having a HP-50 for yourself, go to the contact page and see if we can help you find a trusted installer near you. If you’re in the Fairfield or New Haven county in Connecticut, you’re in luck, because Bruce or I will be over in person in about hour or two.


Bruce Somers plumbing llc provides services, free estimates, installations and repairs on all
Rheem, Ruud, Bradford white, State, and A.O. Smith electric, gas, propane, Bock, Thermaflow/Everhot oil fired hot water heaters, Navien, Rheem, Noritz, and Takagi tankless water heaters, Ruud, Bock, and lochinvar oil fired water heaters, SuperStor storage tanks, Peerless, Laars, and Crown tankless coils, and repairs on all hot water heater throughout the state of Connecticut including Bridgeport, CT- Bristol, CT- Cheshire, CT- Danbury,CT- Derby,CT- East Hartford,CT- East Haven,CT- Enfield,CT- Fairfield,CT- Hamden,CT- Hartford,CT- Meriden,CT- Orange,CT- Middletown,CT- Milford,CT- New Britain,CT- New Haven,CT- New London,CT- Norwalk,CT- East Norwalk,CT- Norwich,CT- Putnam,CT- Shelton,CT- Southington,CT- Stamford,CT- Stratford,CT- Southport,CT- Torrington,CT- Wallingford,CT- Watertown,CT- West Hartford,CT- West Haven,CT- Westport,CT- Wethersfield,CT- all shore areas, and surrounding Connecticut areas. Contact us today for a professional plumbing experience and a free estimate today. 800-524-4280


{ 17 trackbacks }

24 hour plumber birmingham
February 26, 2010 at 7:37 am
stoke plumber
February 26, 2010 at 8:35 pm
connecticut credit repair
March 2, 2010 at 11:33 am
boiler repair stoke
March 10, 2010 at 6:20 pm
In addition to tons of great info, we are some of the best plumbers in Connecticut, and we want to compete for your next plumbing job!
June 7, 2010 at 8:49 pm
The differences between the new electric hybrid heat pump water heaters from GE and Rheem.
September 27, 2010 at 9:42 pm
7,200+ people agree.
October 4, 2010 at 7:15 am
Take advantage of the soon to be expired Federal 30% rebate!
October 8, 2010 at 12:02 pm
How to figure out what kind of water heater you have.
February 9, 2011 at 6:49 pm
So you have an oil fired water heater, or tankless coil running off the boiler, and you want more efficient options.
March 25, 2011 at 10:42 am
How much does my water heater cost to run?
March 31, 2011 at 9:54 am
Pool Virtue Blog
April 6, 2011 at 1:30 am
Comet
August 15, 2011 at 2:45 am
cheap uggs
October 5, 2011 at 3:31 am
D90 vs D5100
October 5, 2011 at 6:54 am
solid oak doors
October 5, 2011 at 9:45 am
Tile factory outlet thai
December 7, 2011 at 2:54 pm

{ 2 comments… read them below or add one }

1 Mike G February 2, 2010 at 11:02 am

Extremely responsive. Was honest; was installing new kind of water heater for first time, and said so. When I wasn’t thrilled with its performance the next day, he came over to change the settings and followed up with the manufacturer. Have already gone to him for an estimate for my next project.

2 Waterheaters Gone Wild February 14, 2010 at 8:31 am

We also installed a True Steam humidifier for Mike last week!
I’d say he’s a satisfied costumer. Jay-

Previous post: Oil fired water heater installation process with pictures.

Next post: Official Rheem Installers.